Ref.: MEL-WA(3D HCV) - OM Ver.1.7
37
6.10.5. RIM LOCKING PIN
– Double sided (for Run flat tyre rims & Fancy disc)
This Rim locking pin of 64mm Lg. is developed for clamping different kind of
LCV Run flat tyre rim profiles, compatible with 24" Wheel bracket.
Fig. 50
6.10.6. RIM LOCKING PIN
– Double sided (for Standard & Steel rims)
This Rim locking pins of 64mm Lg. is developed for clamping different kind of
LCV Steel rims with fancy disc, compatible with 24" Wheel bracket.
Fig. 51
6.10.7. TYRE CATCHING 3POINT CLAMP
This accessory can be used for clamping the Wheel targets with Vehicle Tyre
instead of Rim in order to avoid damages / scratches to the Alloy rims. This
3Point clamp can be used for clamping tyres with diameter range of 470mm to
1100mm & comes with centre hole Ø15mm suitable for holding Target plates.
Fig. 52
6.10.8. LONGER SLIDER
This Longer slider facilitates easy adjustment of Rear wheel Camber / Toe and
also to accommodate Toe correction upto 5°.
Fig. 53
6.10.9. AXLE OFFSET GAUGE
This gauge is used to measure the gap between the Wheel and Axle frame
Fig. 54
6.10.10. TYRE DIA GAUGE
This gauge is used to measure the diameter of the HCV wheels
Fig. 55
