Ref.: MEL-WA(3D HCV) - OM Ver.1.7
52
Place Wheel stoppers 0.5metre before the Front wheels and 0.5metre
behind the Rear wheels to arrest excessive movement of vehicle while
carrying out the Push-Pull Runout
Level all the Target plates & lock knobs before Runout measurement
Make the Gear lever to Neutral position if the vehicle being aligned is
Rear wheel drive
The pushes axle or Tag axle should be disabled from lifting function
(load sensor) in the vehicle for carrying out the Push-Pull runout
While driving the vehicle for Push-Pull Runout, Steering wheel must
be in straight position with respect to the front wheels. Vehicle drive
should be very controlled & constant movement. Avoid sudden brake
which will affect the measurement. Steering lock must be applied
While moving the Vehicle in Forward / Backward direction as guided
by the screen, DO NOT move the vehicle beyond the target region to
avoid from rolling off. Manufacturer is not responsible for any
damage or loss due to non-compliance
While doing Runout, DO NOT jerk the Vehicle or the Target plates
which may cause abnormal Runout
Following screen will be displayed to mount Wheel brackets & Target plates to
its respective location. Enter the odometer readings in to the windows.
Truck with
2 Front axles & 3 Rear axles
Truck / Bus with
1 Front axle & 1 Rear axle
Trailer With 3 Axles (Forward parking)
Trailer With 3 Axles (Reverse parking)
Car with
1 Front axle & 1 Rear axle
Fig. 84
