MANATEC Fox 3D Smart Mobile PT, Service Manual

Page: 28 / 104

Ref.: 3DWA - SM Ver.1.8
25
4.1.3. MAIN CABINET (NA for In-Lift model)
Fig. 19
Sl.No. Description
1 Main cabinet
2 Top cover
3
Wheel bracket
holders-Short
4
Wheel bracket
holders-Long
5
Middle (Printer)
tray
6 Bottom door
7
Monitor column
with support
plate
8
Interface box (If
cabinet supplied)
9
Personal
computer *
10 Monitor *
11 Keyboard *
12 Mouse *
13
Multimedia
speakers *
14 Printer *
15 Caster wheel
* - Refer scope of supply
1. Fix Wheel bracket holders-Short & Long with Main cabinet. Place the
Integrated Wheel bracket & Target plate in respective Bracket holders.
2. Fix the Monitor column at the rear side of Main cabinet using Allen
screw, Plain washer & Spring washer (2 Nos. each). Fix the Monitor
with Support plate in Monitor column.
3. Fix the Caster wheels (with Lock) with Front Caster wheel fixing plate
beneath the Cabinet and fix the Caster wheels (without Lock) to rear
Caster wheel plate. Place the Top cover over the Main cabinet and fix it.
4.1.4. PC ACCESSORIES COLUMN (For Drive Through model)
1. Fix the Monitor column (1), CPU tray (2), Keyboard tray (3), Printer tray
(4), Wheel bracket holders Long (5) & Short (6) with the Column (7) as
shown below:
7
2
3
4
1
8
9
11
6
5
10
Fig. 20
NOTE: Interface box will be fixed with the column at Factory itself
1
7
2
3
5
6
4
10
9
11
12
13
14
8
15