![background image](http://html1.mh-extra.com/html/manatec/fox-3d-smart-mobile-pt/fox-3d-smart-mobile-pt_service-manual_4409014068.webp)
Ref.: 3DWA - SM Ver.1.8
65
DO NOT interchange the Front & Rear Target plates (refer the
Identification sticker pasted at the back side of Target plates)
In case of VH model, raise the Lift platform to required height by
ensuring the Target plate images are visible in the screen
For AVH model, during Calibration, rest both the Horizontal beam and
Lift platform at home position
Select the
FOUR SHAFT CALIBRATION
Icon from
Calibration
options in
Settings
screen. System will prompt for password. Key-
in “FSCMEL” as
password. Following
Attention
screen will be displayed:
Fig. 116
Comply with on-screen instruction & press
NEXT SCREEN
button to proceed.
The Machine will search for the target plates and then displays a
STOP
indication as shown below:
Fig. 117
DO NOT disturb/move the Calibration kit while identifying the Target
plates
Set the verticality of the Camera columns by matching the field VVA with
Factory VVA using Allen screw provided in the vertical column depending on
the direction of the tilt requirement. The VVA angle will ensure the verticality of
the column in front position. For side position, use Spirit level in the bottom
frame and use suitable thickness of shims to fill the gap between the Vertical
column bottom frames & Adjustable Master base plate.
Follow the On-screen instructions (arrow indications) to achieve the below
tabulated conditions. Otherwise the SAVE button will not appear:
Summary of Contents for Fox 3D Smart Mobile PT
