![background image](http://html1.mh-extra.com/html/manatec/fox-3d-smart-mobile-pt/fox-3d-smart-mobile-pt_service-manual_4409014075.webp)
Ref.: 3DWA - SM Ver.1.8
72
7.4.2.
SINGLE SHAFT CALIBRATION (Applicable for the Ver.3.06 & below only)
Single shaft calibration kit will not be compatible for In-Lift model
Mount the Calibration Shaft with Calibration kit stands at both ends. Ensure
the horizontality of shaft using Spirit level by adjusting Jack screws provided in
the Stands and then lock the position using Lock nuts. Finally lock the Shaft
with Stands firmly using M8x25 Allen screws to avoid rotation as shown below:
Calibration
shaft
Jack screw
Lock nut
Target plate
locking knob
Calibration
kit stand
Fig. 125
Cover both the ends of Calibration shaft using End cap.
In case of VH model, raise the Lift platform to required height by
ensuring the Target plate images are visible in the screen
For AVH model, during Calibration, rest both the Horizontal beam and
Lift platform at home position
Select the
SINGLE SHAFT CALIBRATION
Icon from
Calibration
options in
Settings
screen.
Following screen will be displayed. Follow the On-screen instructions:
Fig. 126
Place the calibration kit on the Rotary plates (turn tables) at a distance of 2mtr
as shown in the screen and level the shaft using Spirit level. Mount the Front
target plates in the respective locations (i.e. Left Target plate on Left side and
Right Target plate on Right side of the Calibration kit) and level them. Press
NEXT SCREEN
button to go to Target plate identification screen.
Fig. 127
Summary of Contents for Fox 3D Smart Mobile PT
