![background image](http://html1.mh-extra.com/html/manatec/fox-3d-smart-mobile-pt/fox-3d-smart-mobile-pt_service-manual_4409014089.webp)
Ref.: 3DWA - SM Ver.1.8
86
USB2.0
USB3.0
3.
Remove the LED Driver board from the Hub board fixing plate.
4.
Replace the defective LED Driver board with new board and restore the
power connections.
5.
Check & ensure the input voltage to IR LED board is 9VDC. If not,
adjust the Trimpot to achieve the required voltage.
USB2.0
USB3.0
6.
Ensure the Camera gain & intensity as explained in
Camera testing
(Chapter 8.1). Also ensure the Target plates are displayed properly.
7.
Re-fix the Hub board cover / Front facia.
8.
Ensure the equipment functions without any errors.
In case of replacing the Hub board alone,
1.
Remove the Hub board from the LED Driver board.
2.
Replace the defective Hub board and restore the connections.
3.
Re-fix the Hub board cover.
4.
Ensure the equipment functions without any errors.
9.2.
INTERFACE BOX
9.2.1.
EMI FILTER BOARD / MOTOR CONTROL BOARD
1.
Open the Interface box top cover by removing the Allen screws using
3mm Alley key.
2.
Remove the EMI Filter board & SMPS safety cover.
3.
Replace the defective board with new Board and re-fix it. Restore all the
connections.
Left
Right
Left
Right
Summary of Contents for Fox 3D Smart Mobile PT
