![background image](http://html1.mh-extra.com/html/manatec/fox-3d-smart-mobile-pt/fox-3d-smart-mobile-pt_service-manual_4409014086.webp)
Ref.: 3DWA - SM Ver.1.8
83
9. PARTS REPLACEMENT PROCEDURE
9.1.
HORIZONTAL BEAM
9.1.1.
CAMERA (LH & RH)
After replacing the RH Camera, ensure the image is displayed upside
down in Camera view screen
1.
Before replacing the defective Camera, ensure the following points:
a.
Make sure the Camera is free from any external damage.
b.
Make sure the CD dispatched along with the Camera is readable.
c.
System is switched off and the mains supply is disconnected from
the equipment.
d.
If Left camera needs to be replaced, ensure following files are
available in the CD:
USB2.0
USB3.0
Calib_3D.mdb
Camdata_L.dat
Calib_3D_L.mdb
Camdata_L.dat
e.
If Right camera needs to be replaced, ensure following files are
available in the CD:
USB2.0
USB3.0
Calib_3D.mdb
Camdata_R.dat
Calib_3D_R.mdb
Camdata_R.dat
2.
Remove the respective Camera cover screw & Back plate screw.
3.
Disconnect the Power cables and 10Pin FRC (ribbon) cable. Also,
disconnect the Camera power USB cables.
4.
Remove IR LED board by unscrewing its M3x6 PH screws.
5.
Unscrew the Camera fixing Allen screws & remove the Camera from
Horizontal beam.
USB2.0
USB3.0
6.
Fix new Camera assembly with Horizontal beam & ensure the following:
Camera fixed in correct locations Sticker is always at top
Camera
cover
screw
Back
plate
screw
Summary of Contents for Fox 3D Smart Mobile PT
