MANATEC Fox 3D Smart Mobile PT, Service Manual, Page: 53 / 104

Ref.: 3DWA - SM Ver.1.8
50
3.
Drag the slider to down most position to set “Never Notify” and press
OK
button as shown below:
Fig. 70
Wheel Aligner 3D Setup installation
1. Double click " WA32Axxx.exe
" file in the Software CD (last „xxx‟ denotes
the SW version No.). Following setup wizard screen will be displayed:
Fig. 71
2.
Press “
Next
” button & follow the On-screen instructions provided to
proceed further as shown below:
Fig. 72
3.
Press “
Next
” button to proceed:
Fig. 73