MANATEC Fox 3D Smart Mobile PT, Service Manual

Page: 71 / 104

Ref.: 3DWA - SM Ver.1.8
68
For In-Lift model
*
865 865
Fig. 120
Move the Camera columns in backward or forward direction till the respective
left & right side Vertical columns are made equal physically(1125mm) as
shown above.
Same way, turn the Camera columns towards left or right directions to make
FLXD equal to RLXD (-175mm)
– For left side Vertical column
FRXD equal to RRXD (-175mm)
– For right side Vertical column
Turn the left Camera column towards left side if XD reading is <-175mm and
right side if XD is >-175mm and vice versa for right side Camera column ie., tilt
the column right side if XD is <-175mm and left side if XD is >-175mm. The
acceptable limit for the XD difference is 10mm for frond XD to rear XD.