![background image](http://html1.mh-extra.com/html/manatec/fox-3d-smart-mobile-pt/fox-3d-smart-mobile-pt_service-manual_4409014076.webp)
Ref.: 3DWA - SM Ver.1.8
73
Once the images of the Target plates are identified, the following screens will
displayed:
Fig. 128
Move the Calibration stand forward or backward as guided (arrow blinking) by
the system on the screen to get equal distance between the Camera to the
Front Target plates for Left & Right side (FLZD =FRZD). Once the distance is
achieved, move the Calibration stand in horizontal direction, either Left of
Right side as guided (arrow blinking) by the system on the screen. The
readings will become green after achieving the all the readings are within
±1mm. Try to achieve the difference values zero for the Distance (ZD) and
Horizontal (XD) values for better accuracy. Ensure the spirit level again.
Click
SAVE
button to save the Front distance values. After saving the
distance values, the following screen will be appear:
Fig. 129
Remove the Front Target plates from the stand and fix the Rear Target plates.
Relocate the Calibration stand at the Rear distance (4000mm) as shown in the
screen and level them. Press
NEXT SCREEN
button to go to Target plate
identification screen.
Fig. 130
Summary of Contents for Fox 3D Smart Mobile PT
