![background image](http://html1.mh-extra.com/html/manatec/fox-3d-smart-mobile-pt/fox-3d-smart-mobile-pt_service-manual_4409014101.webp)
Ref.: 3DWA - SM Ver.1.8
98
Sl.
No.
Error
Causes
Remedies
4
Keyboard error message
displayed when system is
switched ON
Any keys in the Keyboard may
be in pressed condition
Switch OFF the system and
release the struck keys and
again switch it ON
Keyboard may be defective
Replace with any other type
keyboard or get the problem
solved by Service Engineer
5 Multimedia speaker not
working
Input supply to speaker may
be disconnected
Remove the plug point and re-
fix it properly and ensure that
the Green light in the Speaker
is switched ON
Replace defective Multimedia
Speaker
6
Demo mode message
displayed in Alignment
screen
USB cable from the
horizontal beam may be
disconnected
Camera is not detected
Re-connect it properly.
USB port in Motherboard may
be defective. Connect to other
available USB port and check.
USB cable may got damaged.
11.2.
MECHANICAL TROUBLE SHOOTING
Sl.
No.
Error
Causes
Remedies
1 Lift stops in between
Motor driving belts loose
Tighten the driving belt
2
Abnormal noise during
operation
Insufficient lubrication
Check & apply lubricants as
required
3 Abnormal noise in Belt
Slackness in belt
Ensure the tightness of belt and
Grub screw in the Driven pulley
11.3.
SOFTWARE TROUBLE SHOOTING
Sl.
No.
Error
Causes
Remedies
1
Hub board not connected
Improper USB cable
connection
Check the USB cable from
PC to USB hub board
Hub board & Camera not
detected
Check Device manager in
PC. If Hub board & Camera
are not detected, check by
replacing the USB cable
PC USB port may be
defective.
Check with other port
No input to Hub board
Check 12V I/P to Hub
board. If there is no input
check the EMI & SMPS
SMPS /EMI Filter failure
Replace with new
SMPS/Board
Hub board failure
Replace with new board
2
Camera disconnected while
booting
Improper USB cable
connection
Check the USB cable from
Camera to USB hub board
Camera driver not installed
or not enabled in OS
Install the Camera driver /
enable the Camera
USB port of the PC may be
faulty
Check with any other USB
port or PC.
Hub board board failure
Replace HUB board
Camera failure
Replace with new camera
assy
Summary of Contents for Fox 3D Smart Mobile PT
