Mamiya 645 AFD III, Instructions Manual

Page: 36 / 68

Single-Frame Mode
The film is advanced one frame each time the Shutter Release Button is
fully depressed.
Set the Shutter Release Selector Lever
to "S".
Continuous-Frame Mode
Photographs are taken continuously as long as the Shutter Release Button
is full depressed.
Set the Shutter Release Selector Lever
to "C".
Photographs are taken at about 1.2 frames
per second.
If you reach the end of the roll of film while
shooting in Continuous Mode, the "End"
flashes on the magazine's LCD Panel.
Exposure Modes
Program AE (P)
The aperture and shutter speed are determined automatically for the optimum
exposure, based on the ambient light.
This mode is best suited for general photography, allowing the photographer
freedom to concentrate on the subject.
While pressing the Exposure Mode Setting
Dial Release Button (A), turn the Exposure
Mode Setting Dial to "P".
If the correct exposure is out of metering range, the Shutter Speed and Aperture Indicators blink
In this case, a correct exposure cannot be made. Readjust the shutter speed or aperture until
the indiators do not blink.
33