![background image](http://html.mh-extra.com/html/makita/ey2650h/ey2650h_original-instruction-manual_229176023.webp)
23
CLEANING OF FUEL FILTER
WARNING: INFLAMMABLES STRICTLY PROHIBITED
Interval of cleaning and inspection: Monthly (every 50 operating hours)
Suction head in the fuel tank
&KHFNWKHIXHO¿OWHU
(A)
SHULRGLFDOO\7RFKHFNWKHIXHO¿OWHUIROORZWKHVWHSV
below:
(1) Remove the fuel tank cap, drain the fuel to empty the tank. Check the tank
inside for any foreign materials. If any, remove them.
(2) Pull out the suction head by using a wire hook through the tank opening.
,IWKHIXHO¿OWHUFORJJHGVOLJKWO\FOHDQLW7RFOHDQLWJHQWO\VKDNHDQGWDS
it in fuel. To avoid damage, do not squeeze or rub it. The fuel used for the
FOHDQLQJPXVWEHGLVSRVHGLQDFFRUGDQFHZLWKWKHPHWKRGVSHFL¿HGE\
regulations in your country.
,IWKHIXHO¿OWHUEHFDPHKDUGRUKHDYLO\FORJJHGXSUHSODFHLW
$IWHUFKHFNLQJFOHDQLQJRUUHSODFLQJLQVHUWWKHIXHO¿OWHULQWRWKHIXHOSLSH
(B)
DQG¿[LWE\WKHKRVHFODPS
(C)
3XVKWKHIXHO¿OWHULQDOOWKHZD\WRWKH
bottom of the fuel tank.
&ORJJHGRUGDPDJHGIXHO¿OWHUFDQFDXVHLQVXI¿FLHQWIXHOVXSSO\DQGUHGXFH
HQJLQHSRZHU5HSODFHWKHIXHO¿OWHUDWOHDVWTXDUWHUO\WRHQVXUHVDWLVIDFWRU\IXHO
supply to the carburetor.
CLEANING OF PARTS
- Keep the engine always clean.
-
.HHSWKHF\OLQGHU¿QVIUHHRIGXVWRUGLUW'XVWRUGLUWDGKHULQJWRWKH¿QVZLOOFDXVHSLVWRQVHL]XUH
REPLACEMENT OF GASKETS AND PACKINGS
In reassembling after the engine is dismounted, be sure to replace the gaskets and packings with new ones.
Any maintenance of adjustment work that is not included and described in this manual is only to be performed by Authorized Service Agents.
B
C
A
A
REPLACEMENT OF FUEL PIPE
CAUTION: INFLAMMABLES STRICTLY PROHIBITED
Interval of cleaning and inspection: Daily (every 10 operating hours)
Replacement: Annually (every 200 operating hours)
Replace the fuel pipe
(A)
every year, regardless of operating frequency. Fuel
OHDNDJHPD\OHDGWR¿UH
If any leakage is detected during inspection, replace the fuel pipe immediately.
INSPECTION OF BOLTS, NUTS AND SCREWS
- Retighten loose bolts, nuts, etc.
- Check for fuel and oil leakage.
- Replace damaged parts with new ones for safety operation.
INSPECTING SPROCKET
Check the sprocket for wear every 50 hours of use. Replace it if the wear marks
becomes 0.3 mm or deeper.
0.3 mm
0.3 mm
Summary of Contents for EY2650H
Page 262: ...262 ...
Page 263: ...263 ...
Page 264: ...Makita Corporation Anjo Aichi Japan 885326A996 www makita com ALA ...