Mahindra XUV500, Owner'S Manual

Page: 60 / 227

FEATURES AND CONTROLS
V102011© Copyright Mahindra & Mahindra Ltd.
2-41
Lumbar Support (if equipped)
Lumbar supports are placed to enhance
comfort level. The lumbar contour of the
lumbar support can be adjusted by means
of the adjusting wheel found on the
inboard side of the back-rest to provide
supplementary support to the spinal
column of the driver, and to maintain a
relaxed upright posture while driving.
Seat Height Adjustment
(If equipped)
The seat height adjuster is located on the
outboard side of the seat. To raise the
seat, pull the lever upward until the seat is
at the desired height. To lower the seat,
push the lever downward until the seat is
at the desired height.
Head Restraint
Adjust the head restraint so that the top of
the restraint is at the same height as the
top of the occupant’s head. This position
reduces the chances of a neck injury in a
crash.
To raise the head restraint, push and
raise the head restraint upward.
To lower the head restraint, push and hold
the stop-catch release, and push the
head restraint down.
To remove the head restraint, push and
hold the stop-catch release, pull the head
restraint up to the highest position and
remove it from the seat.
Adjusting
Wheel
NOTICE
H e i g h t a d j u s t m e n t o f t h e s e a t
c u s h i o n v a r i e s f r o m p e r s o n t o
person to accommodate individual
height requirements. Prior to driving
the vehicle, adjust the seat cushion
height as per requirement.
Up
Lower
Lever
Stop-catch release
Upward
Down