Mahindra XUV500, Owner'S Manual

Page: 46 / 227

FEATURES AND CONTROLS
V102011© Copyright Mahindra & Mahindra Ltd.
2-27
Hazard Warning Indicator
Press the hazard warning indicator switch
located on central bezel switch bank, to
turn ON/OFF the hazard warning lamps.
All of the direction indicator lamps will
flash together.
Use this switch only in an emergency to
w a r n o t h e r r o a d u s e r s w h e n y o u r
s t a t i o n a r y v e h i c l e i s c a u s i n g a n
obstruction, or is in a hazardous situation.
Remember to turn OFF the switch before
moving away.
Turn Signal Indicator
The key must be in ON position. To signal
a turn, move the lever all the way up or
down. The lever returns automatically
after you make a turn, but should be
disengaged manually while changing
lanes.
A n a r r o w o r i n d i c a t o r l a m p o n t h e
i n s t r u m e n t c l u s t e r w i l l f l a s h i n t h e
direction of the turn or lane change. To
signal a lane change, just raise or lower
the lever until the indicator starts to flash.
Hold it there until you complete your lane
change.
NOTICE
• The hazard warning indicator turns
ON automatically if an airbag is
deployed in the event of an accident.
• The direction indicators do not
work when the hazard warning is
activated. Check local regulations
about the use of hazard warning
lamp w hil e th e vehi cle i s b ein g
towed or while driving.
NOTICE
If an indicator lamp stays ON without
flashing or if it flashes abnormally,
the direction indicator bulb may be
burnt out.