MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 62 / 134

PC Program Operation Eurosystem / Profi-LON
D1 E101BA1-GB09 4.23
4.4.1 Brake Test
Although the following screens only show values recorded for the front axle, the description for
the re-display of brake tests applies also to the parking brake and the rear axle.
1 Select <1>. The brake test selection menu
appears.
2 Select the brake values to be re-displayed:
<1> front axle
<2> parking brake
<3> rear axle
<4> final evaluation.
The display of the brake force values
appears which are part of the automatic
testing procedure. Measurement value
which are outside the approved limit values
are shown in red.
3 Select among <FA>, <PB> or <RA>, to
switch between the displays for front, rear
or parking brake. The keys/boxes <F2> and
<F3> have the same function.
The box „Testing:“ shows which brake the
measurement values apply to.
4 Use <ESC> to exit the screen and return to
the selection display.
5 Use the box Print or function key <F12> to
print out the measurement values.
6 Use the <
È
> key to page forward to the
next key which gives more information
about the measurement values.
7 Use the <
Ç
> key to page back to the
previous screen.
8 Use <F4> BF-Graphic and <F5> Pedal
Graphic to page to the appropriate graphic
(screens and explanations next page).