MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 43 / 134

Eurosystem / Profi-LON PC Program Operation
4.4 D1 E101BA1-GB09
4.1.4 Keyboard Usage
The keyboard supplied is used for program guidance, for data entry such as customer address,
defects, vehicle data, for calling up measurements etc.
The description which follows describes only the operation of the communication desk of the
Eurosystem test lane. (or Profi-Eurosystem)
Always pay attention to the blue header (instruction line) of the screen which indicates the keys
to be used.
Š
Escape-key <ESC>
Aborting a function without storing;
exiting a sub-menu..
Š
Function keys <F1> - <F12>
Can be assigned differently depending on
the usage. The detailed function key
description follows later.
Š
Backspace <Return> (Delete)
Deletes the character which was entered
last or changes to the previous menu point.
This key is identical with the # key on the
remote control but not with the # key on the
keyboard!
Š
Page up/Page down
Use these keys to page forward or
backward through the screens. This is only
possible if there are several entry pages.
Š
Tabulator key
Use the Tabulator key to jump to the next
entry mask. Press the Shift key and the
Tabulator key simultaneously to jump to the
previous mask..
Š
Digit keys
To enter numbers use the keys indicated or
the number block on the right-hand side of
the keyboard.
The NUM key must be activated when
entering numbers on the number block.
(Light over the key lights up).