MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 121 / 134

Eurosystem / Profi-LON Appendix
6.2 D1 E101BA1-GB09
6.1 System Variables
No. Description Default Unit Comments
18
Brake tester: Deceleration difference limit value of the
rear axle
If the difference of the deceleration is larger than this
value an error message will appear.
19 Brake tester: Deceleration difference limit value of the
service brake
If the difference of the deceleration is larger than this
value an error message will appear.
20
not used
---
---
21
Brake tester: Front axle limit value ovality
400
N
22 Brake tester: Front axle limit value ovality 50 %
23 Brake tester: Rear axle limit value ovality 300 N
24 Brake tester: Rear axle limit value ovality 30 %
25 Brake tester: Parking brake limit value ovality 400 N
26 Brake tester: Parking brake limit value ovality 40 %
27 Brake tester: Service brake limit value pedal force 300 N
28
Brake tester: Parking brake limit value pedal force
200
N
Italian-Mode only
29
not used
--
--
30
Brake tester: Min. brake value per axle
The brake force on at least one side of the axle must
exceed this value so that the test is automatically stored
and switched to the next axle.
0.5
kN
31 Brake tester: Difference threshold
The brake force difference will only be displayed when
the brake force on both sides exceeds this value. 0.5 kN
32 Brake tester:
Deceleration unit 0 % 0 = %
1 = m / s
2
33 not used
0.10 s
34
Platform tester: Wheel brake force to distinguish
between CAR/Van
4
kN
35 Platform tester: Min. wheel brake force for vans 0.5 kN
36 Platform tester: Axle separation for speed calculation 1900 mm
37 Platform tester: min. test speed 2.5 km/h
38 Platform tester: max. test speed 7.5 km/h
39
Platform tester: Min. wheel brake force for CAR
0.2
kN
40
Side-slip: Value with position after comma
! Only active after program re-start!
0
0 = no
1 = yes
41 Side-slip tester: Deviation limit value (orange)
Test values which lie between this value and that of
Variable 42 are displayed as orange. Test values which
are smaller or the same as the value set down here are
displayed as green. 7 m/km
42 Side-slip tester: Deviation limit value (red)
Test values which are smaller or the same as the value
set down here are displayed as red. 14 m/km
43 not used
44 Side slip tester:
Limit value of the deviation (orange) of axle 2. 18
45 Side slip tester:
Limit value of the deviation (red) of axle 2. 18
Ireland (Dublin)
Mode
46 to 50 not used --
--