MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 54 / 134

PC Program Operation Eurosystem / Profi-LON
D1 E101BA1-GB09 4.15
Allocation after the test
The screen confirms that the current
measurement values are stored as dataset
with the allocated customer/vehicle.
At the same time the vehicle is completed, i.e.
the system signalizes that it is ready for a new
measurement if the screen returns to the main
menu after approx. 3 seconds.
The main menu appears and the instruction
line reads:
)
New test can begin ...
Allocation before the test
You have selected a vehicle from the queue in
order to start with the test.
1 The main menu appears and shows the
vehicle license plate in the last line.
The system is ready.
)
New test can begin ...
Drive onto the test lane
2 After the test the instruction line reads:
)
Test values available (store)...
3 a) Store the test values with <5>, if other
tests are to be done
or
b) Store the measurement values with <4>
and end the vehicle test.
4.2.7 Prepare New Test
Make sure that the temporary storage is empty and the main menu appears with the message:
)
New test can begin ...
After properly storing the test values (section 4.2.6) the main menu appears automatically in test
readiness. It is also possible that the instruction line shows a different ready message or that a
test has been aborted and is to be started again from the very beginning.
1 Activate <F8> in the main menu.