MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 65 / 134

Eurosystem / Profi-LON PC Program Operation
4.26 D1 E101BA1-GB09
4.4.2 Shock Absorber Test
Although the following screens only show values which were recorded for a front axle, the
description applies to the rear axle as well.
1 Select <5> to re-display the shock absorber
values for the front axle
or
Select <6> to re-display the shock absorber
values for the rear axle.
2 The screen opposite appears. Measurement values outside the given limit values or the
Eurosystem variables are displayed in red.
3 In the box “Testing:“ in the right-hand
corner of the screen “FA“ appears for front
axle. Simultaneously the front axle of the
vehicle outline below will be highlighted red.
4 Select <FA> or <RA> to change between
the display for front/rear axle (the keys
<F2> and <F3> have the same function).
The box “Testing:“ shows to which shock
absorbers the measurement values apply.
5 Use <ESC> to exit this screen and return to
the selection display.
6 Use <F12> to print out the measurement
values.
7 Use the <
È
> key to page forward to the
next screen which defines the
measurement values even further.
8 Use the <
Ç
> key to page back to the
previous screen.