MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 60 / 134

PC Program Operation Eurosystem / Profi-LON
D1 E101BA1-GB09 4.21
4.4 Re-Display of Measurements
A distinction is made between
Š
Display of a currently conducted measurement, i.e. the customer/vehicle is still active, and
Š
Display of a measurement which was recorded in the past, i.e. the desired measurement
must be loaded.
1 Select <3> Measurements in main menu.
The measurement database appears from
which the desired measurement is selected
or
the screen at the bottom of the page will
appear after a currently conducted test.
If a license plate number appears in the last
line the measurements of this vehicle will be
shown. In order to select another vehicle use
the box <F8> New Vehicle and then <3>
Measurements.
The measurement database appears:
2 The screen to the left shows the
measurements database.
3 Use the cursor key until the desired VEH is
marked or enter the search word in the
upper line with the keyboard.
4 Confirm with <RETURN> or <F4>. The
measurement values are called up and are
available for selection as shown in the
screen below.
Please pay attention to the line:
Lic. plate no.: Test date: Customer name:
The vehicle data appear for the vehicle which
is currently being tested or which was loaded
from the database.
5 Select the desired test stand with the cursor
keys and confirm with <RETURN>.
The selection can also be done using the
function and/or letter keys.