MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 127 / 134

Eurosystem / Profi-LON Appendix
6.8 D1 E101BA1-GB09
6.1 System Variables
No. Description Default Unit Comments
190 Turning Plate: No. of Impulses per rotation 1000
Imp./U
191 Turning Plate: Timeout after occupied 10
s
192 Turning Plate: Limit value for angle Difference 0.02
Grad (
°
)
193 Noise level: Calibration factor 5781 Quest 2400 = 5781
194 Noise level: Offset 49.4 Quest 2400
195 Noise level: Limit value orange 90
196 Noise level: Limit value red 90
197 ES_IN limit value storage after completion
only if ES_IN ES_OUT active
1 0 = no
1 = yes
198 Motorcycle test 0 0 = Manual start
1 = Automatic
199 4 gas test ( channel 1 ) request with F11 key 0
0 = automatic
1 = active
200 Test Equipment-Adminstration
pre-warning days till next calibration
10
201 Singapore Special mode
Minc with switching
1
0 = no
1 = yes
202 Side-slip tester- only test with front axle 0 0 = no
1 = yes
203 to 204 not used --
--
205 Brake tester: Automatic Oval test 1 0 = no
1 = yes
206 Brake tester: Autom. Oval test with parking brake 0
0 = no
1 = yes
207 not used -- --
208 Brake tester: dynamic weight only when variable 209 = 1 0 0 = no
1 = yes
209 Brake tester: own scale 0
0 = no
1 = yes
210
to
219
to 219 not used -- --