MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 100 / 134

PC Program Operation Eurosystem / Profi-LON
D1 E101BA1-GB09 4.61
Button
Description
The automatic procedure can be continued with
<F6>
An automatic procedure starts in which the
frequency increases from 5 Hz to 50 Hz in
increments of 0.5 Hz. The current frequency can be
stored at any time using the <F8>.
Description of the Test
1
Drive the vehicle onto the test plate with the desired axle.
The test plates may only be started when occupied, otherwise there may be test stand
damage due to oscillating unloaded test plates.
2
The left or the right or both test plates start. The pre-set start frequency is 20 Hz. This
frequency can be changed at any time.
3
The frequency can be manually raised or reduced to search for noise sources. An automatic
procedure can also be started.
4
If an unusual noise occurs at a certain frequency, this frequency can be stored.
The measurement value stored last appears
in the upper line. The max. number of values
to be stored depends upon the resolution. A
bar appears to the right for scrolling when
there are more than 4 stored values.
(Scrolling is only possible with the mouse)
The stored frequencies appear on the print out after completion of the test.