MAHA SA 2 Euro, Operation & Maintenance Manual

Page: 116 / 134

Maintenance / Troubleshooting Eurosystem / Profi-LON
D1 E101BA1-GB09 5.5
5.4 Error Codes / Error Messages on the Multifunctional Display
Error codes can be displayed in the Profi-LON analog display using the pointer.
Display error code 32
3 kN on the left hand display
2 kN on the right hand display
If error code appears turn off the test lane with the main switch and turn on again. If error code
reappears contact MAHA service.
Error codes brake tester
Pointer
le. ri.
Description Remedy
0 1 Hardware test defective
Contact service.
0 3 Zero point left side defective
Contact service.
0 4 Zero point right defective
Contact service.
3 2 Slip switch-off left side defective Contact service. Only limited operation
possible.
3 3 Slip switch off of both sides does not
function Contact service
Test stand without function
3 4 Slip switch off of the right side does not
function Contact service. Only limited operation
possible.
4 1 Only left sensor roller pressed Correctly position vehicle or contact
service.
4 2 Only right sensor roller pressed Correctly position vehicle or contact
service.
5 1 Test stand occupied when being started. Exit test stand. Switch on again or
contact service.
To skip error codes press ON key. Brake test is possible.
Particular error codes such as 32 / 34 may cause the slip control to switch off
(ON lamp blinking). In this case do not operate the brake tester.
→
Failure to comply can result in tire destruction