Maguire Products, Inc.
Rev. December 18, 2019
– ULTRA-1000 Touchscreen
81
ULTRA By Maguire
- Ultra Low Energy Dryer
ULTRA-1000 Technical Specifications
SCOPE
- Provide up to 1,000 pounds per hour (454 kg/hr) of dry material to an injection perform
process utilizing energy efficient vacuum drying technology. Drying temperature will be
350º F (185º C) with a final moisture level of 50 ppm or less, and an IV range of 0.82 ±0.02
POWDER REQUIREMENTS
- Voltage: 480 Vac, 3 Phase, 60 Hz or 400 Vac, 3 Phase, 50 Hz
- FLA: 60
- Disconnect:: 100 Amp Fused at 70 Amps
- Air: 85 psi or 6 bar
- Heating Element: Primary: 40 Kw, Secondary: 3 kW (purge circuit)
- Blower:
10 HP, 600 scfm @ 40” water 23” dia. Cincinnati centrifugal w/ Variable
Frequency Drive
HEATING HOPPER
- Capacity: 1,000 lbs (454 kg)
-
Double insulated construction, 4” of R-15 insulation
-
Large Access Door, 18” x 18”
- Diffuser cone removable without tools
- 304 Stainless steel internal wall construction, material contact
VACUUM CHAMBER
- Capacity: 400 lb (180 kg)
- Rail mounted for ease of access or removal
-
Double insulated construction, 4” of R-7.5 insulation
- Access Hatch, insulated glass with captive air gap insulation
- 304 Stainless steel internal wall construction, material contact
- Cam-lock fitting on vacuum connection
- Unions on most air connections for ease of maintenance
- Adjustable height, paddle style, material level control
- V-band clamps on major connections for quick access
MATERIAL SHUT-OFF / VACUUM VALVE
- Single assembly dual acting valve
- Butterfly style material shut-off valve
- Swing valve for vacuum shut-off
RETENTION HOPPER
- Capacity: 400 lb (180 kg)
-
Double insulated construction, 4” of R-7.5 insulation
- 304 Stainless steel internal wall construction, material contact
- Adjustable height, paddle style, material level control
General Information
