Maguire Products, Inc.
Rev. December 18, 2019
– ULTRA-1000 Touchscreen
8
ULTRA By Maguire
- Ultra Low Energy Dryer
Installation
Transport and Setup
Shipment
The ULTRA-1000 Dryer is shipped as separate components that require re-assembly.
The 3 main sections are:
Retention Hopper and Vacuum Chamber
Assembly (A & B)
–
The Retention hopper is
identified by the recessed pneumatics cabinet on the
front panel and the removable Retention Hopper on
the lower slide rail. The Vacuum Chamber Weight is
identified by the control panel on the front panel, the
electrical cabinet on the left side and the hanging
vacuum chamber. Total assembly weight is 2250 lb
(1021 kg)
Heating Hopper Assembly (C)
–
Located on top of
the frame that encompasses the Vacuum Chamber
and Retention Hopper. Weight is 509 lb (231 kg)
Optional Sub Frame (D)
– a sub frame that elevates
the Retention Hopper Assembly 16 inch allowing
material to be convey from the base of the ULTRA
Dryer. Weight of the Base Frame is 309 lb (140 kg)
Other smaller components will be included.
Lifting and Moving components of the Dryer
Ensure your lifting equipment is
rated to lifting the weight of the
individual sections of the
ULTRA-1000.
Follow forklift safety rules
and regulations whenever
moving portions of the
ULTRA-100
The ULTRA-1000 platform is designed for ease of lifting and moving. The retention
hopper and vacuum chamber assembly frame was designed with two steel channels
spanning the depth of the machine to allow for a fork truck to safely and easily lift and
position the machine into place.
