22
OxyMag_rev26
Assembly Sequence
OK
Figure
5. Connect the power supply AC/DC to the
equipment then to the mains.
□
6. Connect the oxygen hose to the transport
ventilator.
□
7. Connect the appropriate flow sensor to the
patient according to the figure.
□
8. Connect the flow sensor line as indicated in the
figure on the right.
□
Note
•
There is an indication with a larger circle and a smaller circle in the ventilator showing the fitting position of
the pressure line connector in the equipment.
•
There is no specific position for the disposition between the operator and the patient, as long as the breathing
circuit is mounted properly.
•
For electrical insulation of the ventilator circuits from the external source, just disconnect the power supply
input +12VDC from the equipment.
