manualshive.com logo in svg

Mackie DLZ CREATOR, Owner'S Manual, Page: 79 / 95

Share
Download
Mackie DLZ CREATOR Owner'S Manual Download Page 79

DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY

79

 

From the EQ channel view you are able to set a preset for the channel’s EQ. Don’t forget to scroll up and/or down  

 

to access more factory presets, if going that route. EQ presets do 

NOT

 recall either the HPF on/off or the EQ on/off.

 

From the gate, compressor and de-esser channel view you are able to set a preset for the dynamics.  

 

Don’t forget to scroll up and/or down to access more factory presets, if going that route.

 

From the FX channel view you are able to set a preset for the FX. Don’t forget to scroll up and/or down to access more  

 

 

factory presets, if going that route.

IMPORTANT – DO NOT FORGET!

 Presets are also available on the OUTPUT! This includes the same presets  

as previously found in the channel setup, EQ, compressor, reverb and delay windows.

oad

Save

Rename

Gate Presets

Default

Flat

Noise Gate

oad

Save

ename

Compressor Presets

7B Comp

Flat

Heavy

Mid

Light

oad

Save

ename

De-Esser Presets

5.9 kHz

Flat

6.4 kHz

EQ 

PRESETS

GATE

PRESETS

COMPRESSOR

PRESETS

DE-ESSER

PRESETS

oad

Save

ename

EQ Presets

EM-99B

Flat

Music

Sparkle

oad

Save

ename

Reverb Presets

Cathedral

Medium Room

Small Room

Hall

oad

Save

ename

Delay Presets

Long Decay

Slapback

Space

Warm

REVERB

PRESETS

DELAY

PRESETS

Summary of Contents for DLZ CREATOR
































































































Reviews:

No comments