manualshive.com logo in svg

Mackie DLZ CREATOR, Owner'S Manual, Page: 48 / 95

Share
Download
Mackie DLZ CREATOR Owner'S Manual Download Page 48

DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY

48

 

FX Setup > Effect On / Off [Pro]

Located above the level knobs are the FX on/off switches. Tap the mute switch(es) to turn the reverb and/or delay  
on or off for that channel. It will illuminate purple [reverb] or cyan [delay] when engaged and is grey when disengaged.

 

FX Setup > FX Presets [Pro]

Presets save parameters and may be recalled as needed. DLZ Creator comes with a library of factory presets.  
There are also user presets. These may be created for each preset type.

An entire chapter is dedicated to presets. This includes detailed instructions and multiple screenshots every step of the way. 
Please check it out on pages 76-79.

Below the FX preset pull-down and effect on/off switch are a total of eight rotatable knobs – four on the Atomizer Reverb  
and four on the ChronoTronic Delay. Flip the page and let’s take a look at what these do!

Reverb in Pro Mode

Delay in Pro Mode

Summary of Contents for DLZ CREATOR
































































































Reviews:

No comments