DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY
49
FX Setup > Atomizer Reverb Settings [Pro]
The reverb may be adjusted by (1) rotating one of the four quick control knobs associated with it
(noticing how the base of the quick control knobs match the color of each effect) or (2) moving the knobs
via tap-and-rotate. The FX may be adjusted whether the effects are on or off.
Pre-Delay —
When listening to a live performance, direct sounds are reached first, followed by reverberation caused
by room reflections. The pre-delay is the amount of time between when the direct sounds arrive and when the reflections
arrive. The range is 0 ms to 50 ms.
The speed of sound is approximately 340 meters per second (1100 feet per second). This means that in one millisecond,
it travels 0.34 meters (1.1 feet). As a rough idea, think of 1 ms as the time it takes for sound to travel one foot.
Decay —
This represents the decay time of the reverb. The range is 200 ms to 8 seconds.
Low Pass —
This applies a low-pass filter to the reverbed signal and rolls off the higher frequencies.
It ranges from 400 Hz to 20 kHz.
Reverb Level —
This sets the reverb FX send level for the currently selected channel. The range is –inf (off) to +10 dB.
FX Setup > Atomizer Reverb at a Glance [Pro]
FX Setup > ChronoTronic Delay Settings [Pro]
The delay may be adjusted by (1) rotating one of the four quick control knobs associated with it
(noticing how the base of the quick control knobs match the color of each effect) or (2) moving the knobs
via tap-and-rotate. The FX may be adjusted whether the effects are on or off.
Delay Time (Decay) —
This knob sets the current delay time, ranging from 100 ms to 2.0 seconds.
Feedback —
This controls how much of the delayed signal is routed back to the input of the delay section to create
multiple echoes. Each time the signal is fed back, the delayed signal becomes quieter (so the echo won’t go on forever
unless set at 100%). It ranges from 0% to 100%.
Low Pass —
This applies a low-pass filter to the delayed signal and rolls off the higher frequencies.
It ranges from 20 Hz to 20 kHz.
Delay Level —
This sets the delay FX send level for the currently selected channel. The range is –inf (off) to +10 dB.
FX Setup > ChronoTronic Delay at a Glance [Pro]
Parameter
Low Value
High Value
Default
Atomizer Reverb Enable
Off
On
On
Pre-Delay
0.0 ms
50.0 ms
0.0 ms
Decay
200.0 ms
8.0 sec
200.0 ms
Low Pass
400 Hz
20 kHz
20 kHz
Reverb Level
–inf
+10 dB
–inf
Parameter
Low Value
High Value
Default
ChronoTronic Delay Enable
Off
On
On
Delay Time (Decay)
100 ms
2.0 sec
500 ms
Feedback
0%
100%
50%
Low Pass
20 Hz
20 kHz
8 kHz
Delay Level
–inf
+10 dB
–inf