DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY
72
Just follow the steps listed below:
This probably goes without saying, but we’re going to say it, anyway. In order for the USB drive to be formatted
via the DLZ Creator, the USB drive needs to be connected to the DLZ Creator’s USB-A slot. You have been using
USB-A slots for years now. It only fits one way. Due to Murphy’s Law, you will, of course, try one way and it
won’t work. You will flip it around and find out that that way does not work, either. And, of course, flipping back
to the original way WILL work this time. Those darned USB-A slots!
Granted, you might have a difficult time trying to format the USB drive if that first condition isn’t yet met. For one, it doesn’t
easily fit in any other way – which you have already found out – and for another, DLZ Creator will remain with the “USB drive
not present” statement as seen four pages back.
Now that the USB drive is inserted properly and DLZ Creator is fired up, it’s time to format the USB drive.
Head to Settings > Bluetooth / Disk. The display will look something like this (Image A). Tap ‘Format USB Drive’.
This is a permanent deletion with no undo, so a confirmation dialog helps prevent accidents.
Formatting will completely erase the USB drive, so please back up any files before formatting!
Tap ‘Format’ (to continue with the formatting) or ‘Cancel’ (if it was an accidental tap) (Image B).
As seen in Image C, the USB Drive is formatting.
DO NOT DO ANYTHING UNTIL FORMATTING IS COMPLETE
(Image D)!
Image B
Image A
USB Drive
Capacity
128GB
Capacity
Available
72GB
Available
256GB
128GB
Format USB Drive
USB Disk Format Required
This disk must be formatted to continue.
Formatting will erase all disk data.
Proceed with disk format?
Cancel
Format
USB Drive
Capacity
128GB
USB drive not present
Formatting...
Format USB Drive
USB Drive
Capacity
128GB
USB drive not present
Formatting Done
Format USB Drive
Image C
Image D