manualshive.com logo in svg

Mackie DLZ CREATOR, Owner'S Manual, Page: 70 / 95

Share
Download
Mackie DLZ CREATOR Owner'S Manual Download Page 70

DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY

70

Granted, you might have a difficult time trying to format the microSD Card if these conditions aren’t yet met. For one, it doesn't 
easily fit in any other way, and for another, DLZ Creator will remain with the “SD card not present” statement as seen two pages 
ago.

Now that the microSD card is inserted properly and DLZ Creator is fired up, it’s time to format the microSD card.

Head to Settings > Bluetooth / Disk. The display will look something like this (Image A). Tap ‘Format SD Card’.

 

This is a permanent deletion with no undo, so a confirmation dialog helps prevent accidents.  
Formatting will completely erase the SD Card, so please back up any files before formatting! 
Tap ‘Format’ (to continue with the formatting) or ‘Cancel’ (if it was an accidental tap) (Image B).

As seen in Image C, the microSD card is formatting. 

DO NOT DO ANYTHING UNTIL FORMATTING IS COMPLETE

 (Image D)!

Image B

Image A

SD Card

Capacity

124GB

Available

96GB

Format SD Card

SD Format Required

This card must be formatted to continue.

Formatting will erase all card data.

Proceed with card format?

Cancel

Format

SD Card

SD card not present

Formatting...

Format SD Card

SD Card

SD card not present

Formatting Done

Format SD Card

Image C

Image D

Summary of Contents for DLZ CREATOR
































































































Reviews:

No comments