DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY
37
Channel Setup > EQ Introduction [Pro]
The equalizer area accesses all EQ-related parameters such as 3-band EQ for the selected channel
(including gain, frequency and Q) and a high-pass filter (HPF).
You can really upset things with too much EQ. Each EQ band has a lot of boost and cut because that is needed
on occasion. But if the EQ is maxed on every channel, the mix turns to mush. Equalize subtly, using cut as well
as boost. If you find yourself repeatedly using a lot of boost or cut, consider altering the sound source such
as placing a mic differently, trying a different kind of mic, a different broadcaster, gargling, or all of the above.
Channel Setup > EQ On / Off [Pro]
The EQ button – near the upper-left corner of the screen – allows for true bypass of the EQ circuitry to ensure that there
is no coloration of the signal if the EQ is not needed. When this button is disengaged, the EQ controls have no effect
on the signal. You may use this button to make an A/B comparison between the EQ’d signal and the signal without EQ.
Tap this button to turn EQ on or off. It will illuminate cyan when engaged and is gray when disengaged.
Channel Setup > EQ Presets [Pro]
Presets save parameters and may be recalled as needed. DLZ Creator comes with a library of factory presets.
There are also user presets. These may be created for each preset type.
An entire chapter is dedicated to presets. This includes detailed instructions and multiple screenshots every step of the way.
Please check it out on pages 76-79.