Data export
89
NANOCOLOR
®
UV
/
VIS
II and
NANOCOLOR
®
VIS
II V 1.1 / 10.2017
Press the
icon to open the list of the MACHEREY-NAGEL tube tests. Select the test
from this list for which you want to display the pictogram. The last pictogram to be retrieved
will be shown on the display. (
Please note: Pictograms are not available for all of the tube
tests
). You can view pictograms with several pages by scrolling vertically on the screen.
Press the
icon to export the pictogram currently being displayed as an image file to a
connected data storage device.
6.9
Data export
6.9.1
LIMS
The LIMS configurator allows the compilation of a user-defined data set that can be
transmitted from the memory of the photometer to a Laboratory Information and
Management System (LIMS). Press the icons
to open the LIMS
configurator (see Figure 115). On the left hand side of the window, the desired fields can be
selected and deselected with the check boxes, while the
and
buttons
can be used to change their order. On the right hand side of the window are the settings for
formatting the data set. Entries can be made for a data start field, a separator field, a data
end field, an end of line feld, and the decimal point.
Selecting the checkbox
“Send header” will result in a header being sent with each data set
which shows the photometer type, the serial number of the device, and the firmware version
installed.
Figure 115: LIMS configurator
In addition to the settings for the data set, the interface through which the data is transmitted
has to be defined. Press
to view and change the settings for the interface (see
Section 6.5.1). Select the desired connection for the LIMS from these options (see Figure
116).
Attention: In order to use the RS232 interface, the LIMS has to have a serial-COM
data reader. For connections via LAN, the LIMS has to have an http data reader.
The connection via USB is realized as a LAN adapter in the photometer.
Summary of Contents for NANOCOLOR UV/VIS II
Page 1: ......
