214325
89
Revision A
4
Performing Predelivery Checks
This machine has been set at the factory and should not require further adjustments; however, the following checks
will ensure your machine provides maximum performance. If adjustments are necessary, follow the procedures in
this chapter.
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
before making adjustments to machine.
IMPORTANT:
To avoid machine damage, check that no shipping material has fallen into machine.
1.
Perform final checks as listed on
Predelivery Checklist
(yellow sheet attached to this instruction
–
) to ensure
machine is field-ready. Refer to following pages for detailed instructions as indicated on Checklist. The
completed Checklist should be retained either by Operator or Dealer.
4.1
Checking Transport/Stabilizer Tire Pressure
Check tire inflation pressure. If necessary, adjust pressure according to following table:
Table 4.1 Tire Inflation Pressure
Size
Load Range
Pressure
ST205/75 R15
D
448 kPa (65 psi)
E
552 kPa (80 psi)
IMPORTANT:
Do
NOT
exceed maximum pressure specified on tire sidewall.
