214325
31
Revision A
Figure 3.33: Adapter
2.
Start engine and slowly approach header until feeder
house is directly under adapter top cross member (A)
and alignment pins (C) on feeder house (shown in
Figure
) are aligned with holes (B) in
adapter frame.
Figure 3.34: AGCO Group Alignment Pins
NOTE:
Feeder house may not be exactly as shown.
Figure 3.35: Feeder House and Adapter
3.
Raise feeder house slightly to lift header, ensuring
feeder house saddle (A) is properly engaged in
adapter frame.
4.
Stop engine and remove key from ignition.
