![background image](http://html.mh-extra.com/html/macdon/a40-d/a40-d_unloading-and-assembly-instructions_685650085.webp)
214805
77
Revision A
4.3
Lubrication Points
–
Right Side of Header
NOTE:
Use high temperature extreme pressure (EP2) performance with 1% max molybdenum disulphide (NLGI Grade 2) lithium
base. To prevent binding and/or excessive wear caused by knife pressing on guards, do
NOT
over-grease. If more than 6 to
8 pumps of grease gun are required to fill the cavity, replace the seal in the knifehead.
Figure 4.3: Header Right Side
1022213
A
B
C
D
A - Knife Drive Bearing (1 Place)
B - Reel Shaft Bearing (1 Place)
C - Auger Shaft Bearing (1 Place)
D - Knifehead Bearing (1 Place)