214805
20
Revision A
3.10
Assembling Forming Shield
1022367
A
A
B
Figure 3.27: Forming Shield in Shipping Configuration
1.
Unpack and remove shipping material.
2.
Remove bolts (A) from side deflectors (B).
1013771
A
B
C
D
E
Figure 3.28: Rubber Strap
3.
Install rubber strap (A) to side bracket (B) using bolt (C),
washer (D), and nut (E).
4.
Repeat for the other side.
1004487
A
B
C
D
E
Figure 3.29: Center Deflectors
5.
Lay cover (A) upside down on a flat surface.
6.
Install center deflectors (B) using three bolts (C) on each
side.
NOTE:
Arrange deflectors (B) so that narrow end (D) is toward the
front of cover (A) and deep end (E) is toward the rear as
shown in the illustration at right.
