214805
25
Revision A
1005067
A
B
Figure 3.38: Forming Shield Attached to
Windrower Frame
5.
Lift aft end of the forming shield and attach straps (B) to
pins (A) on the windrower frame. Install washer and hairpin
to secure strap. Use the middle hole and adjust height to
suit the crop.
1005183
A
B
C
Figure 3.39: Side Deflectors and Fluffer Shield
6.
Set forming shield side deflectors to desired width by
positioning adjuster bars (A). Use the same hole location on
both sides.
•
Position deflectors at the narrowest setting for a narrow
windrow (silage for example).
•
Position deflectors at the widest setting for a wide
windrow.
7.
Adjust fluffer shield (C) to middle position. Loosen
handles (B) if required.