214805
82
Revision A
5.2
Checking Auger Stripper Bar Clearance
1008866
A
B
B
Figure 5.3: Auger
1.
Check for signs of auger flighting (A) rubbing stripper
bars (B) after run-up.
1008977
A
B
B
B
Figure 5.4: End View Diagram Showing Auger and
Stripper Bars
2.
Check clearance between auger flighting (A) and
stripper bars (B).
NOTE:
The auger flighting (A) should clear the stripper bars (B) on
the auger pan by approximately 1
–
4 mm (1/32
–
5/32 in.).
Shimming the stripper bars may be required.