214805
11
Revision A
3.4
Lowering the Header
To lower the header to the ground, follow these steps:
1.
Attach either a spreader bar or chain to forks.
CAUTION
Ensure spreader bar or chain is secured to the forks so that it cannot slide off the forks or towards the mast as the
header is lowered to the ground.
1008868
Figure 3.9: Header with Forklift
2.
Drive lifting vehicle to approach header from its underside.
3.
Attach chain hooks to lean bar at slots as shown.
IMPORTANT:
See table below for minimum chain specifications. Also,
chain length must be sufficient to provide a minimum 1.2 m
(4 ft.) vertical chain height.
Table 3.1 Chain Specifications
Chain Type
Overhead lifting quality (1/2 in.)
Minimum Working Load
2270 kg (5000 lb.)
CAUTION
Stand clear when lowering, as machine may swing.
