214805
49
Revision A
1009113
A
B
C
Figure 3.96: Large Coupler Assembly
4.
Remove and discard cap (C) and adapter fitting (B) with
O-ring from the large coupler (A).
1009116
A
B
Figure 3.97: Valve Block Configured for Auger Header
5.
Install large coupler (A) onto the fitting at port R1 on valve
block (B).
IMPORTANT:
Make sure the O-ring is on JIC threads in port R1 to ensure
a proper seal with coupler (A). If the O-ring is missing, reuse
the O-ring from the discarded adapter fitting in Step
1009111
A
B
C
Figure 3.98: Small Coupler Assembly
6.
Remove and discard cap (C) and adapter fitting (B) from
small coupler assembly (A).