214805
27
Revision A
1005534
A
B
Figure 3.41: Driveline Shield
1.
Disengage rubber latch (A) and open driveline shield (B).
1005635
A
B
C
Figure 3.42: Support Bracket and Hose Bundle
2.
Remove cap (A) from the electrical connector and remove
the connector from the support bracket.
3.
Disengage and rotate lever (B) counterclockwise to fully up
position to release the hose bundle (C).
1005529
A
B
C
D
E
Figure 3.43: Hose and Electrical Bundle
–
4.3 m and
4.9 m (14 ft. and 16 ft.) Header Shown (5.5 m [18 ft.]
Header Similar)
4.
Move hose/electrical bundle (A) to header.
5.
Route bundle (A) from windrower through support (B) and
access hole (C) in header frame alongside existing hose
bundle (D) from header.
6.
Remove cover on header electrical receptacle (E).
7.
Push connector onto receptacle and turn collar on
connector to lock it in place.
8.
Attach cover to mating cover on windrower wiring harness.
9.
Remove caps from hydraulic couplers. Clean if necessary.
