214805
73
Revision A
3.19
Repositioning Knife Drive Box Breather
There is one knife drive box at each end of the auger header. The knife drive box sits at different angles when in shipping
and field positions. When the position is changed, the breather has to be moved to make sure oil does not leak from the
knife drive box.
1008992
A
B
Figure 3.149: Top View of Knife Drive Box
1.
Move breather/dipstick (A) to back port and install plug (B)
in forward port at knife drive boxes.
1008993
A
Figure 3.150: Side View of Knife Drive Box and Close-
up of Dipstick
2.
With top of knife drive box horizontal, check oil level. It
should be between the lower hole (A) and the end of the
dipstick.
3.
If required, add SAE 85W-140 lubricant.
