M86 Security M86 Threat Analysis Reporter, User Manual

Page: 125 / 938

WF G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM SCREEN
M86 S
ECURITY
U
SER
G
UIDE
97
Specify LAN Settings
1. In the Host Name field, enter up to 50 alphanumeric
characters for the name of the host for this server, such
as
wfr.logo.com .
2. Specify the following information, as necessary:
• In the LAN1 IP field of the IP/Mask Setting frame, the
default LAN 1 IP address is 1.2.3.3 . Enter the IP
address and select the corresponding subnet mask of
the LAN1 network interface card to be used on the
network.
• In the LAN2 IP field, the default LAN 2 IP address is
1.2.3.4 . Enter the IP address and select the corre-
sponding subnet mask of the LAN2 network interface
card to be used on the network.
TIP : Be sure to place the LAN1 and LAN2 IP addresses in
different subnets.
• In the Primary IP field of the DNS frame, the default IP
address is 4.2.2.1 . Enter the IP address of the first
DNS server to be used for resolving the IP address of
the authentication server with the machine name of
that server.
• In the Secondary IP field of the DNS frame, the default
IP address is 4.2.2.2 . Enter the IP address of the
second DNS server to be used for resolving the IP
address of the authentication server with the machine
name of that server.
• In the Gateway IP field of the Gateway frame, the
default IP address is 1.2.3.1 . Enter the IP address of
the default router to be used for the entire network
segment.
3. Click Apply to apply your settings.
NOTE : Whenever modifications are made in this window, the
server must be restarted in order for the changes to take effect.