WFR A
PPENDICES
S
ECTION
A
PPENDIX
II
884
M86 S
ECURITY
U
SER
G
UIDE
However, if a hard drive has failed, the message “FAIL”
displays to the right of the hard drive number.
Before taking any action in this window, proceed to Step 3.
Step 3: Replace the failed hard drive
After verifying the failed hard drive in the Administrator
console, go to the server to replace the drive.
On a 300 series model, be sure the carrier is unlocked, then
press the section on the carrier handle labeled PUSH to
release the carrier handle. On a 500 series model, press the
red release button to release the carrier handle.
Extend the carrier handle fully by pulling it out towards you.
Pull out the failed drive and replace it with your spare
replacement drive. Push the drive into its slot, and press the
carrier back in place.
NOTE
: Contact Technical Support if you have any questions
about replacing a failed hard drive.
500 series model hard drive carrier
300 series model hard drive carrier
