To get in the configuration menus and to setup the device, press the arrow
down or “-” button.
An arrow left or right (<>) in the screen indicates the possibility to
navigate with the left right buttons of the front end.
●
Unlock the node
When the node is set in auto-lock mode or is password protected through
the Web interface, it will automatically lock the front end after 2 min of
inactivity of front end controls. If you try to change something with front
end, the following message “DEVICE LOCKED” will blink.
To unlock the node with no password :
–
Hold down up and down arrow button for 2 seconds
–
A “HOLD TO UNLOCK” message appears
–
“DEVICE UNLOCKED” : the node is unlocked
To unlock the node set with a password :
–
Hold down up and down arrow button for 2 seconds
–
Password has to be set with left and right buttons, change value with
up and down buttons.
–
Press enter to confirm the password=> the node is unlocked
•
Reset the node (Out of jail)
This useful function makes it possible to bring the node in a factory
default.
1. Power down the unit.
2. Hold down up, down, left and right buttons all together
3. Power on the node.
4. Wait until “Reboot default” message is displayed
5. Release buttons, then press enter to confirm
6. “FACTORY RESTART !! WAIT !!” is displayed
7. The node is now in a factory default: IP: 2.0.0.2 / 2.0.0.3
Ethernet - DMX8 / WiFi
Page 9 of 54
>>
>>
>>
> >
<<
<<
<<
+
-
< 1: IN MRG >
Outlet 1
< 2: IN M CST >
Outlet 2
< 8: OUT >
Outlet 8
