Gateway
: Sets the AP default gateway address in your LAN.
DNS
: Sets the primary Domain Name Service Server for translating the
domain name into IP address.
Press Submit when you've finished.
Wireless settings
Description:
Enable Wifi
: Tick that box if you wish to switch off the radio. This can be
very useful when you wish to use two or more wireless nodes as wired
node connected to a switch. This prevents to create broadcast storms.
SSID
: (Service set Identifier) LumWifi is the default setting. The SSID is a
unique name that identifies a network. All devices on a network must
share the same SSID name in order to communicate on the network. If
you choose to change the SSID can be up to 32 characters in length.
Mode
: Default is “Client”. This menu define the way your device operates.
Luminex Wireless systems use a centralized infrastructure, that means
one or several clients connected to a main access point. Even for a two
units link (point to point), you will need an Access point and a client.
If you wish your wireless device to act as a client, a “Site Survey”
hyperlink will appear as soon as you'll have submit the new settings.
Region
: Select the Region where you wish to use the unit. This setting
influences the available channels. As the standard for 802.11 differs for
countries across the world respectively it's the responsibility of the user to
familiarise themselves with the available local frequencies and to work
Page 44 of 54
Ethernet - DMX8 / WiFi
