Store profile
To store a profile, apply the following procedure.
Choose
Global Set., Profiles Store
and press
Enter.
Select an empty profile to store the profile, or choose the profile you want
to overwrite.
When an empty profile is chosen, the device will ask to edit the profile
name. By default it will come up with “profile “ followed by the profile
number.
When an already used profile is chosen the device will come with the
existing name. You can edit the name or just go on by pressing enter.
When you want to save over an existing profile, you'll obviously see
“OVERWRITE” instead of “STORE” in the confirm window. Be aware that
overwritten profiles can't be recovered in any way.
Firmware version
This screen quickly display the firmware version running on the node.
This can be useful to check if you're running the latest version.
Visit our Web site to download the latest firmware :
www.luminex.be
Page 22 of 54
Ethernet - DMX8 / WiFi
Enter
>>
<<
+
Enter
Enter
Enter
>>
<<
Enter
Enter
Profiles
Recall >
Profiles
< Store
12. --Empty--
13. --Empty--
Store Profile
12.Profile 12
Store 12 ?
CONFIRM >
Store 12 ?
< CANCEL
Use Up and Down keys to select
an empty profile to store in or a
used profile to overwrite
To edit the name of the profile,
use the Up and Down keys to
change the character And use the
Left and Right keys to change the
edit field.
> >
>>
> >
> >
< <
< <
< <
+
+
+
+
-
> >
>>
> >
< <
< <
< <
.: Eth-DMX8 :.
ID: 001 >
1:Node 1
<2.0.0.2 >
2:Node 2
<2.0.0.3 >
Eth 12345678
< ........ >
Configuration
Network >
Configuration
< DMX >
Configuration
< Global Set.
Firmware ver.
< 3.0.0
