Wireless
The Ethernet DMX8/W is the wireless edition of the Ethernet DMX8
gateway, allowing you to transport your ArtNet DMX stream through a
802.11a/b/g wireless link, and to connect other 802.11 compatible
devices such as PDA or computer to your Wireless DMX network.
The Ethernet DMX8/W comes with an on-board wireless device which
offers you multiple configurations (access point, client) depending of your
needs.
The Ethernet DMX8/W offers you all the Ethernet DMX8 features plus the
ability to transfer your data wireless, meaning you have access to the
merging, spliting, backup features on a wireless tool !
System requirements for configuration :
•
a computer with Windows, Macintosh, or Linux based operating
system with an installed Ethernet adapter
•
an Internet web browser such as Internet Explorer or Mozilla Firefox
(recommended) with JavaScript enabled
•
a Cat.5 (or Higher) network cable
Wireless basics
Installation considerations
Keep in mind that the number, thickness and location of walls, celling,
trees, rivers, or other objects that the wireless signal must pass through,
may limit the range. Typical ranges vary depending on the types of
materials and background RF (radio frequency) noise in your show place.
The key to maximizing wireless range is to follow these basic guidelines:
1. Always use a wireless system only when it is
NOT
possible to run
DMX cable.
2. Keep in mind that Ethernet IEEE 802.11 system can cause or
receive interferences from :
•
Other 802.11 systems, using for show or not.
•
If you are using 2,4Ghz cordless phones, X-10 equipment or
other security systems, ceiling fans, your wireless connection
can be degraded. Try changing your channel on the Ethernet
Ethernet - DMX8 / WiFi
Page 39 of 54
